Hybridization Ovens
Page 8
81-0169-01 Rev Q
OPERATING INSTRUCTIONS
Please note that this equipment is not intended for interconnection with any other devices. Use of this equipment
other than intended may create a safety hazard and/or malfunction.
Using the Hybridization Oven
•
Place the unit on a level working surface
and provide adequate room in front of the
door to open it easily.
•
Plug the female end of the power cord
into the unit.
•
To turn on the main power supply,
depress the Power switch toward “ON” on
the right side of the control panel.
•
To adjust the temperature setting to the necessary degree, press either the “UP” or “DOWN” buttons
below the temperature control display to raise or lower the displayed degree (displayed in degrees
Celsius). This setting is adjustable from ambient 10°C to 99.9°C. See “Setting the Temperature Controls”
for more detail.
•
To turn on the motor for the bottle holder, press the motor control power switch to the “ON” position.
•
To adjust the bottle carousel to the desired RPM, simply turn the motor control knob clockwise to
increase the RPM and counterclockwise to decrease the RPM.
Minimum RPM = OFF/10
Maximum RPM = 18
NOTE
: The inside of the hybridizer should be cleaned with a damp cloth. The bottle carousel assembly can
be cleaned with soap and water.
