8
Assembly guide for UVI chair STYLER | DEVIL | BACK IN BLACK
Usage instructions
All UVI chairs have the original memory foam which will adapt to your body after the first few hours of
usage. Because of this, sitting can be uncomfortable at the beginning.
All the chairs that have the 180 degrees inclination are perfectly safe to use. Our bodies are not used to
this position, so they can have a reflexive response to it. We recommend you to lower the chair to this
position gradually, so your body can adapt.
All our chairs are made to carry the maximum allowed weight. If you use the chair improperly, damage
to it or to you may occur. Jumping, hanging and similar activities are, of course, not advised.
You can adjust the height, back rest and tilt of your UVI chair.
-
Adjust the height by using the handle under the seat (on the right side).If you want your chair
to go higher, please get off of the chair, and if you want to lower the position, simply sit on it.
-
On the right, you will find the handle that adjusts the angle of the back rest. You can adjust the
angle by lifting the handle. When rising it, please hold the back rest to prevent it from striking
you.
-
Under the seat is the round button which controls the tilt of the chair. You can turn it left or
right to get the desired tilt. If you do not want your chair to tilt, please push the handle (for
height control) to the left or right. This will disable the tilt function of the chair.
Important!
Never seat at the end of the chair! Try to sit as straight at the middle of the chair as possible with
your shoulder blades touching the back of the chair. We highly advise the use of the head pillow. The
lower pillow might not feel right to all users. In case you cannot get used to it, we advise you to
remove it as it may cause you to lose focus while gaming/working.
Warning!
Don’t seat at the end of the chair as it may tip over if you do so. Sit in the natural posture. We also
highly recommend you NOT TO cross your legs when sitting.
