6
Assembly guide for UVI chair STYLER | DEVIL | BACK IN BLACK
STEP 7
Place the back plate (6) on the bottom plate and secure it with the side screws M8x25mm (longer, B).
First, screw all of them half way, then till the end. Please, apply reasonable strength.
STEP 8
Attach the side covers (3) to the side mechanism. Start by pushing the lower part into the hole so it
locks, then screw the upper side with the screw for the cover plastic (F). On the inner side of the cover,
L (left side) and R (right side) are indicated and they mark the side where each of the two covers should
be applied. At last, apply the hole covers.
