Page | 8
15-
The WiFi light should turn Green, if a successful connection to your WiFi is made
16-
Disconnect your computer from UVCPECTRA WiFi Network, and connect to
your WiFi network
17-
Type in the IP address of system to go to user interface. (i.e.
http://192.168.0.101
)
18-
Enter password ( default is
1234
)
19-
You can Turn ON / OFF from the user interface.
20-
Always start the system with 100% FAN power
21-
After one minute, you can decrease the speed of the Fan
22-
You can change default password and default WiFi key from the Settings menu
23-
Please consult technical service if there is an error signal in the User Interface
Optional:
If you want to access the User Interface from Internet, consult your IP admin to make
a port forwarding.
Example:
Forward Port 1101 to my UVCpectra
Now you can access with a browser from your internet using below format:
http://yourcompanyInternetIP.com:1101
or:
http://213.244.45.66:1101
(Ip address and port needs to be given by your IP
admin)
Enjoy the clean air.
Informative Lights and meanings:
WiFi LED
Orange
Working as an Access Point.
Green
Connected to WiFi Network
Blinking green:
Trying to connect to WiFi
Network
UVC LED
Off
UVGI is off
BLUE
UVGI is ON
BLUE BLINK
Starging UP (20 – 60 seconds)
RED BLINK
Error in Fan or Bulbs
Press the UVC button to turn ON/OFF device without user interface
Press and hold WiFi button 10 seconds to RESET wifi settings to Access Point
(factory defaults)
