10
1.Place unit in
AUTO
mode by pressing and holding
B
for
three seconds.
2.Press
B
and quickly press and hold the head down.
2.The currently selected baud rate, (
b96
)
AUTO
and
ADJ
appear. Press
A
to step through the available baud
rates; 300, 600, 1200, 2400, 4800, or 9600.
3.Press the head down while holding
B
to return to the
operating mode.
Battery Replacement -
When the two AA alkaline
batteries need to be replaced,
LO BATT
will appear on the
display. The unique illumination system and power
conservation features provide more than one million
measurements on a set of batteries. Loosen the screw
on the bottom of the unit and remove the battery cover
plate. Discard the old batteries and install two new ones
in the same positions.
Reset Button
- If the unit fails to respond or an unusual
display appears, press the red reset button located on
the bottom of the display. The display will blank and then
display a number. Press the unit down on the white
substrate to zero in
AUTO
mode or press and hold
B
to
switch to
MAN
mode.
Optional Equipment
QC01 Statistical Analysis Software
Automatic data collection, display, and statistical analysis
is provided by QC01. Running on any Windows system,
measurement data is transferred via the serial port and
displayed on screen. Density values are plotted vertically
against a horizontal tolerance band, visualizing trends and
error conditions. Spot colors and process color modes
are supported.
