75
CDM9945 User Guide
USING PHONE MENUS
74
CDM9945 User Guide
• The Bluetooth icon shall display on the Status display area when the Bluetooth is set to ON or OFF.
• The CDM9945 will display all devices found within 30 seconds. If Search is pressed within the 30
second duration, the phone will stop searching and display only those devices found up to that time.
• Devices on the list are sorted in alphabetical order.
• If the device has an alias already defined, it will be displayed on the list.
• Add up to 20 alias names to the list.
• The device performing the search does not appear in the list.
• For more information regarding the Passkey, refer to the device manual.
7.1.1 Setting
Allows you to view the your Bluetooth Name, Power, and Address.
1. Press
.
• My Phone Name Sound comes from phone now. When selecting this menu, sound comes
from bluetooth headset.
• Discovery Mode
Sound comes from Bluetooth device now. When selecting this menu, sound
comes from phone.
7.2 Pairing Start.
If “Pairing Start” task is highlighted, soft key available on the BLUETOOTH screen shall be On
or off / OK / Settings
1. Press
[MENU],
2 times,
,
.
Set the desired device to pairing.
2. Select the ON / OFF then press
.
OK
7. Bluetooth
The CDM9945 features built-in Bluetooth technology, allowing you to share information
easier than ever before. Bluetooth is a short-range communications technology that allows
you to connect wirelessly to a number of Bluetooth devices, such as headsets, hands-free car
kits, and Bluetooth enabled handhelds and PCs. The Bluetooth communication range is
usually up to approximately 10 meters (30 feet).
Access and Options
1. Press
[MENU].
2. Press
2 times [SETTINGS & TOOLS].
3. Press
Bluetooth.
4. Select a sub-menu.
Add New Device / Pairing Start.. / ACL Connect Start / Ring Start / Disconnect Start / Test
mode Start / Headset / Phone
7.1 Add New Devices
If “Add New Device” task is highlighted, soft key available on the BLUETOOTH screen shall be
On or off / OK / Settings
1. Press
[MENU],
2 times,
,
.
Set the desired device to pairing.
2. Select the ON / OFF then press
.
OK
OK
