Functions can be selected directly by entering a number, or by searching from anoth-
er function.
Direct selection by entering a number
(ex.: F10, whisper mode)
1
Press
e
2
Enter the number of the function.
ex.:
1
s
0
3
Perform operations.
• Operation varies according to the selected function.
Search from another function
(ex.: F# functions)
1
Press
e
s
u
3
Perform operations.
• Operation varies according to the selected function.
• Custom F# functions can be accessed in the same way.
• Custom F# functions cannot be accessed until they are programmed.
See p. 61.
2
[
Select function.
27
2. Before using your phone
Always charge the battery before using the phone for the first time and when it has
been unused for an extended period. (p. 22)
Turning the power on
w
(press and hold)
26
2. Before using your phone
SELECTING A FUNCTION
continued to next page
TURNING THE POWER ON/OFF
• The backlight for the display and key will light for about 10 seconds.
NOTES
In the default mode
• “Wait Please” will flash when the power is turned on for the first time after
replacing the battery and being recharged. Information required for phone oper-
ation is being loaded into memory. The delay until the phone can be used will
vary with how much information has been stored.
function number
➔
Turning the power off
w
(press and hold)
*SM-801 PHS/sec2(GB) 00.3.9 4:31 PM Page 26
