UTStarcom UT-300R, User Manual

Page: 15 / 28

UT300-R Ethernet ADSL MODEM USER MANUAL
- 15 -
Figure 3.5
3. Click “Bridging” Page -> choose eoa-7 option for interface name -> click “Add” button -> click “Submit”
button.
4. Click Commit & Reboot label in the page Admin, shown as in Figure 2.3. Click “Commit” button to save.
When it shows “Changes Committed Successfully...” click “Reboot” button or turn off then turn on the ADSL
MODEM. The MODEM will work on the new parameters.
3.3 STATIC ROUTING CONFIGURATION
(RFC1483 routing)
a) ATM VCC configuration
Use one of the factory default ATM VCCs for example: aal5-7 (VPI=0, VCI=33)
b) EOA configuration
−
Only one PPP can be accepted by the MODEM as default router. So confirm there are no PPPs in
the “PPP” of Page “WAN”.
−
Click EOA label. The factory default configuration sets 6 EOAs (RFC1483 bridge). Add eoa- 7 for
example.
−
Click “Add” button, the pop up window is shown as Figure 3.4
−
Choose aal5-7 for Lower Interface option