3
2. INSTALLATION AND SETUP FOR QUICKLINK MOBILE
This section will guide you through the installation and setup process for QuickLink
Mobile. Before getting started, you should become familiar with the documentation
that came with your PC Card.
CD’s
1. If you purchased a PC Card, there is only one CD that contains QuickLink
Mobile and PC Card drivers.
Getting Started
To install QuickLink Mobile:
1. Turn on your computer then close all applications.
2. Insert the CD-ROM into your CD drive.
3. If set up does not automatically start, click the Start button on the taskbar then
choose Run. Type D:\Start (where D is the letter of your CD-ROM drive) then
click OK.
4. Follow the steps in the next section.
* QuickLink Mobile software must be installed before you insert the PC Card in to
the computer for the first time. Only after the software has been installed can
Windows successfully install and configure the PC Card.
2.1 QuickLink Mobile Setup Program
STEP 1:
Click the “Install Quicklink Mobile”. A screen will appear asking if you want to
run QLmobile.exe. Select Yes. The “Welcome” screen appears. Click the Next
button to continue with the installation process.
