Reference Information
Before a new model phone is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe exposure.
The tests are performed in positions and locations (e.g., at the ear and
worm on the body) as required by the FCC for each model. While there
may be differences between the SAR levels of various phones and at
various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines.
SAR information on this model phone is on file with the FCC and can
be found under the Display Grant section of http://fcc.gov/cet/fccid after
searching on FCC ID printed in the label on the phone. FCC certification
information for this model phone is attached separation paper.
For body worn operation, this model phone has been tested and meets
the FCC RF exposure guidelines when used with a supplied approved
accessory designated for this product or when used with and accessory
that contains no metal and that positions the handset a minimum from
the body.
The minimum distance for this model phone is written in the FCC
certification information from the body. None compliance with the
above conditions may violate FCC RF exposure guidelines.
For more Information concerning exposure to radio frequency signals,
see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov/rfsafety
Cellular Telecommunications Industry Association (CITA)
http://www.wow-com.com
U.S. Food and Drug Administration (FDA)
http://www.fda.gov/cdth.consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
Reference Information
104
103
Your phone is a product of superior design and craftsmanship and
should be treated with care. The suggestions below will help you to
fulfill any warranty obligations and allow you to enjoy this product for
many years. When using your phone:
●
Keep it and all its parts and accessories out of small children’s reach.
●
Keep it dry. Precipitation, humidity and liquids contain minerals that
will corrode electronic circuits.
●
Do not use or store it in dusty, dirty areas as its moving parts can be
damaged.
●
Do not store it in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain
plastics.
●
Do not store it in cold areas. When the phone warms up (to its
normal operating temperature), moisture can form inside the phone,
which may damage the phone’s electronic circuit boards.
●
Do not drop, knock or shake it. Rough handling can break internal
circuit boards.
●
Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean it. Wipe it with a soft cloth slightly dampened in a mild soap-
and-water solution.
●
Do not paint it. Paint can clog the device’s moving parts and prevent
proper operation.
●
Use only the supplied or an approved replacement antenna.
Unauthorized antennas, modifications of attachments could damage
the phone and may violate regulations governing radio devices.
●
If the phone, battery, charger, or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for service.
Care and Maintenance
