Chapter 2 - Page 27
BASIC FUNCTIONS
BASIC FUNCTIONS
Page 26 - Chapter 2
BASIC FUNCTIONS
BASIC FUNCTIONS
CALL WAITING FUNCTION
Notifies you of an incoming call when you’re on a call
by sounding a beep and displaying the caller’s phone
number on the screen.
1. To answer another call while on the phone
press . This places the first call on hold.
2. To switch back to the first caller, press
again.
ADJUSTING VOLUME
Volume can be adjusted by using the volume control
keys on the side of the handset, or by using the menu.
1. Press
[MENU] then select one of the
following. To increase the volume, press the
Navigation Key to the right. To lower the volume,
press it to the left.
2. Adjust volume then press
[OK] to save it.
●
Ringer: Controls the ringer volume.
●
Key Tone: Controls the key pad tone volume.
●
Voice Call: Controls the earpiece volume.
●
Speaker Phone: Controls the speaker volume
in speaker phone mode.
●
Since Call Waiting is system dependant, the displayed
Caller ID may be different from the actual caller.
LOCK
Locks your phone and prevents unauthorized use.
Phone can only be used after inputting the password.
1. To lock the phone, press and hold
.
2. To unlock the phone, press
, , or
[UNLOCK] then input the password.
●
When the phone is locked, this status is still
maintained even when power is off.
●
The default password is the last 4 digits of your
phone number.
NOTE:
To adjust the volume of the microphone during
a call, press the volume keys on the side of the
phone or the Navigation Key (left or right).
NOTE:
The caller ID is stored in the call history.
CALLER ID FUNCTION
Identifies caller by displaying their phone number.
If the caller’s name and number are already stored in
your phone book, they both will appear. This feature
is system dependent. Please contact your service
provider for details.
