There are totally 8 different web pages.
Three are for the users, index.htm, reset.htm and rs232
The remaining five pages are for configuration of the box and is reached only by admin, they are:
config.htm:
For configuration of IP address, port number, title at the user pages, basic or digest
authorization, and the time the box is reserved for
one
user.
switches.htm:
Here the names of the 8 ON/OFF buttons and the delays at power on and the reset delays
is configured.
users.htm:
Here is usernames and passwords for the 8 users + admin and Telnet is configured.
rights.htm:
Here access rights are configured for all user 1 to 3 and for those not logged in.
r2.htm:
Here access rights are configured for users 4 to 8.
2. The main page.
The main page (index.htm) is used to switch the outputs ON/OFF..
When you click at the ON or OFF button a
request for this is sent to the box.
Then the button turns gray until the box has
confirmed the change. When the confirmation
arrives the button indicates current setting again.
In this way you can be sure that the change
request actually has reached the box and been
serviced.
If you click at "refresh screen" then a question
about current status is sent to the box. The
buttons turns gray until the reply is received. This
is particular useful when many user control the
box.
In some cases you might like to switch more
than one output at exactly the same time. The
you untick the box "update box on change".
The nothing is sent to the box until you click
the button "update box".
The digits 1 to 16 above the ON/OFF buttons
may be replace by your own text. This is done
at the configuration page switches.htm.
A title at top of the page can be configured at
the page config.htm.
These changes can only be done after you have
logged in as admin, as described in the
configuration part below.
