Fitting Unit to Wall
Remove the drawer fronts from the unit. Fully open
the drawer, close it 10cm and lift it clear of the
runners.
Fix the hanging brackets to the wall at the width
shown. Ensure that they are secured using fixings
suitable for the wall type and the weight of the unit.
Level the brackets by inserting washers between the
bracket(s) and the wall.
Slide the unit onto the hanging brackets and secure from
underneath with suitable screws. Ensure all fixing holes
are used.
Place the basin onto the worktop. Do not drag the basin
as this will scratch the finish.
Fitting Drawer Front
To re-fit the drawer front, engage the tag on the drawer
clip into the drawer sides. Tilt the drawer front forwards
and push the drawer front into the drawer box sides.
Drawer adjustment
Horizontal adjustment
– press the lever beneath the
drawer box side and move the drawer front horizontally
as required.
Vertical adjustment
– slacken screw 1 and adjust the
height as required by turning screw 2.
Tilt adjustment
– turn the screw on the inside of the
drawer box sides, toward the rear of the box
Care & Maintenance
Furniture should be regularly dusted with a soft cotton or micro-fibre cloth. For more thorough
cleaning, occasionally wipe your furniture with a soft cloth dampened with a mild detergent
solution. Surfaces should be thoroughly dried with a lint free cloth to prevent watermarks. Under
no circumstances should solvent cleaning agents, bleach or abrasive cleaning agents or cloths be
used. Spills should be removed immediately using a clean cloth. Glass or mirrored panels should
be cleaned using a non-solvent based glass cleaner and a soft cloth. All bathroom furniture will
deteriorate through prolonged periods of exposure to high levels of condensation so bathrooms
must be adequately ventilated using suitable extraction. Failure to ensure adequate ventilation
may invalidate your guarantee.
