Fitting Cabinet to Wall
It may be necessary to snap the wall plate in half at the marked line
to create two wall brackets. Mark a horizontal line on the wall at the
required height X---X. Ensure that the wall brackets will fit inside the
width of the cabinet and are equally spaced to ensure even distribution
of weight. Secure the wall brackets to the wall using suitable fixings.
Hook the unit onto the wall brackets ensuring that the brackets
are securely located.
To adjust the position of the cabinet on the wall, use the two screws
in each hanging bracket. The top screws will move the cabinet
closer to or further away from the wall. The lower screws will move
the cabinet up and down.
A securing screw should be fitted through the back of the unit through
the fixed back rail of the cabinet and into the wall. This will help to
stabilise the unit.
Fitting Doors
To fit the doors, remove the door hinges from the cabinet by pressing
button D.
Lay the door face down and push the door hinges into the
pre-drilled holes. Secure them in place by tightening screws E.
To re-fit the door hinges, push the hinge arm onto the mounting plate
from the front. Push the rear of the hinge arm onto the plate until a click
is heard.
Door hinge adjustment
To square the door against the cabinet, turn screws A until adjusted
as required.
To adjust the door closer to or further away from the cabinet, turn
screws B.
To adjust the door vertically, slacken screws C. Re-tighten once
the door is adjusted as required.
To remove the door hinges from the cabinet, press button D.
To remove the door hinges from the door, remove screws E.
Care & Maintenance
Furniture should be regularly dusted with a soft cotton or micro-fibre cloth. For more thorough
cleaning, occasionally wipe your furniture with a soft cloth dampened with a mild detergent
solution. Surfaces should be thoroughly dried with a lint free cloth to prevent watermarks. Under
no circumstances should solvent cleaning agents, bleach or abrasive cleaning agents or cloths be
used. Spills should be removed immediately using a clean cloth. All bathroom furniture will
deteriorate through prolonged periods of exposure to high levels of condensation so bathrooms
must be adequately ventilated using suitable extraction. Failure to ensure adequate ventilation
may invalidate your guarantee.
