UtilityMate UM5806, Assembly Manual

Page: 2 / 8

- 1 -
COPYRIGHT 2004-2009 /
Utility Mate
®
Assembly Guide
At-A-Glance Trailer Assembly Overview
1.
2. 3.
1. _____
STAGE 1; Gather the tools needed to assemble the trailer.
•
11mm, 13mm, 17mm, 19mm, 21mm, 24mm sockets w/ extension
•
11mm, 13mm, 17mm, 19mm, 24mm open end wrench(s)
2. _____ STAGE 2; Open & remove all parts from on top of the trailer frame.
VERY IMPORTANT;
Locate and remove the page that has the Certificate of
Origin request on the back page of the Owner’s Manual for safe keeping.
3. _____
STAGE 3; In the order stated, mount the springs, fenders, axle, wheels,
tongue, and then plug in the tongue 12v cord into the trailer frame 12v plug.
4. 5. 6.
4. _____
STAGE 4; In the order stated, mount the rear lights, 2” coupler on
tongue, and the safety chain.
5. _____
STAGE 5; Mount the side panels. Make sure the frame posts are on the
exposed (outside) of the trailer, with the smooth metal on the inside.
6. _____
STAGE 6; Mount the front & back gates.
PLEASE NOTE:
Refer to the picture gallery online which visually shows the parts
and steps to properly assemble the Utilty Mate
®
trailer. The attached checklist
below details the assembly for each stage of the trailer assembly.