Phone (828)323-8914
Fax
(828)323-8410
Web
101 33
rd
Street Drive SE · Hickory, NC 28602
Trouble Shooting
If the Jack Jumper™ Cutout Bypass Tool appears to be malfunctioning do not attempt
to repair it. Immediately remove it from service, tag it as defective, note the specific
problem, and return it to Utility Solutions for inspection. Any disassembly will invalidate
any and all product guarantees, claims and warranties.
Maintenance
The Jack Jumper™ Cutout Bypass Tool is designed to withstand usual operational
usage. Proper care and handling will increase the longevity of service. Periodically
inspect the Jack Jumper™ Cutout Bypass Tool for corrosion and copper coil fraying/
separation. The Jack Jumper™ Cutout Bypass Tool is sold as a complete unit. Any
maintenance, disassembly or misuse voids any and all warranties, guarantees, or
liability.
Warranty
Utility Solutions warrants the Jack Jumper™ Cutout Bypass Tool for any defects in
manufacturing for the period of one year. If the tool is returned within that time period,
Utility Solutions will replace the tool free of charge. No warranty is made if spring is
overextended.
7
Removal and Storage (both)
After all repairs are complete and removed fuses or other items of equipment are
replaced and the fuse door is closed, it is safe to remove the Jack Jumper™ Cutout
Bypass Tool.
1. Grasp the bottom in-line ring of the Jack Jumper™ Cutout Bypass Tool with the
shotgun stick and release the lower attachment hook (Figure B or D).
2. Release the bottom ring from the shotgun stick, and then grasp the top ring with the
shotgun stick.
3. Gently lift the Jack Jumper™ Cutout Bypass Tool until the upper attachment hook is
free (Figure A or C).
4. Return the Jack Jumper™ Cutout Bypass Tool to its specially designed storage and
transfer case.
