10. Install (2) 32-watt T8/3,000K up to 4,100K/10,000
hour/F32T8 fluorescent bulbs (not included). Do not use
any other wattage of linear fluorescent bulb. Install the
bulb into the bulb sockets (B) by aligning the pins of the
bulb with the slot in the bulb sockets (B). Using your
thumb and forefinger, press the metal ends of the bulb,
and roll the bulb forward until it rotates 90 degrees inside
the bulb socket (B), making contact between the bulb pins
and the bulb socket (B) contacts. Repeat for each bulb.
ASSEMBLY INSTRUCTIONS
8. CEILING JOIST MOUNTING: While holding the fixture
pan (A) in line with the pilot holes, drive the wood screws
(CC) into the wooden studs. Tighten until the fixture pan (A)
has been secured to the mounting surface.
DRYWALL MOUNTING: For mounting into drywall, hold the
fixture pan (A) in line with the drywall anchors (DD) that
were installed in step 4 and drive the wood screws (CC)
into the drywall anchors (DD). Tighten until the fixture has
been secured to the mounting surface.
11. While holding the diffuser (C) with one hand,
maneuver the diffuser (C) into the end of the fixture that
does not have a spring attached to the end cap (D) until
the diffuser (C) seats into the end cap (D).
11
D
C
9. Tighten machine screws (BB) until the fixture has
been secured to the electrical box.
Wood
Screw
CC
x 2
Hardware Used
8
DD
A
A
CC
CC
Machine
Screw
BB
x 2
Hardware Used
9
CC
CC
A
B
10
B
5
