background image

2

TABLE OF CONTENTS

PRODUCT FEATURES & SPECIFICATIONS

SAFETY INFORMATION

 

Product Features & Specifications.............................................................................................................. 2

 

Safety Information................................................................................................................................. 2 – 3

 

Installation Instructions   ....................................................................................................................... 4 – 5

 

Operating Instructions ................................................................................................................................ 6

 

Care and Maintenance ............................................................................................................................... 7

 Warranty 

 .................................................................................................................................................... 7

PLEASE READ AND UNDERSTAND THIS ENTIRE MANUAL BEFORE ATTEMPTING TO ASSEMBLE, OPERATE 

OR INSTALL THE PRODUCT.

PRECAUTIONS: 

This product is intended for indoor residential and office use only, not for industrial or other commercial application. 

Use only with electrical wiring that is in good working order and that meets applicable codes and ordinances. This 

heater must be plugged in to a 120V AC, 15 A (or larger) circuit. Do not plug anything additional into the same circuit. 

If you have any questions whether your wiring is adequate, consult a qualified electrician. Risk of fire, overheating, 

malfunction, property damage, injury or even death may result if not adhered to.

Use your heater only with a working smoke detector located in the vicinity of your heater.

While using your heater, you should follow the 

IMPORTANT INSTRUCTIONS

 listed below. 

As part of those instructions, we have used the word 

“WARNING”

 to indicate the level of hazard. 

WARNING

 indicates a hazard which, if not avoided, could result in injury or death.

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock 

and injury to persons, including the following important instructions.

IMPORTANT SAFETY FEATURES

*POWER INDICATOR LIGHT:

The power indicator light, located near the control panel, lights whenever the heater is plugged in. 

**AUTOMATIC OVERHEAT PROTECTION: 

The heater is equipped with an automatic overheat protection device located inside the body of the heater. If the 

heater grille is obstructed, or if the heater gets too hot for any reason, the automatic overheat protection device will 

turn the heater off. To reset the heater, simply turn power off and unplug the heater for 10 minutes until it cools down 

and you may plug in and restart the heater. Be sure that the heater is on a smooth level surface with no obstructions. 

Top Mounted Control Panel 
Power Indicator Light* 
Safety Overheat Protection** 
Stay cool body with dent-resistant end panels 
Silent Operation

FEATURES

Two Heat Settings:
II – High 1500 watts (5120 BTU)
I – Low 750 watts  
120V A.C.
60Hz
12.5A  

SPECIFICATIONS

Summary of Contents for CZQTV5MLSCN








Reviews: