5
Lowes.com
OPERATING INSTRUCTIONS (CONTINUED)
2. Running the pump:
a. Press the power switch (2) on the pump (A) to turn
the pump on.
b. Hold the pump (A) until water starts to fl ow from
the hose (1) and ensure the pump (A) is free from
debris.
c. Once the pump (A) is no longer removing water,
turn the pump off by pressing the power switch (2).
d. Remove the pump (A) and hose (1) when fi nished
pumping.
e. Flush the pump (A) thoroughly with fresh, clean
water when fi nished.
A
1
2
2
CARE AND MAINTENANCE
WARNING:
Periodically inspect the pump and system components to ensure the pump inlets are
free of debris. Always ensure the pump is off before performing any maintenance tasks.
Note:
Remove batteries from the pump when they are discharged or if the pump will be stored for an
extended period. Discharged batteries occasionally leak, which will destroy the electrical circuit of the
pump.
1. Cleaning debris from the pump:
a. Turn the pump upside down and remove the fi lter
screen (1) by removing the fi lter screen screws (2)
with a Phillips screwdriver (not included).
b. Remove any debris.
c. If there is additional debris, remove the impeller
chamber cap (3) by removing the impeller
chamber cap screws (4) and remove the debris.
d. Replace the impeller chamber cap (3), impeller
chamber cap screws (4), fi lter screen (1), and fi lter
screen screws (2).
2
1
4
3
