40
MAINTENANCE
3.
Remove three nuts (see
figure 8
) from bucket filter
adapter.
4.
Lift up the filter adapter (grey plastic ring) and remove the filter (shown in
figure 9a
on the left).
Insert a new filter, and reassemble the device using the three threaded rods (see
figure 9b
).
5.
Reassemble bucket lid adapter with three nuts,
taking care not to over tighten and crush the filter
(see
figure 10
).
6.
Place the top assembly onto the container.
7.
Center it and align the gray plastic ring
(see
figure 10
) with the black container lip
(see
figure 11
).
Figure 8
Figure 10
Figure 9a
Figure 9b
