Figure 6
11”
Attach the burner harness zip tie to right side jacket
9.
with the screw provided. See
Figure 6
.
Attach the side jackets to the lower intermediate
10.
bracket at rear of boiler. See
Figure 7
.
Figure 7
Place the rear insulation on the rear of the boiler.
11.
Attach the lower rear. Insert the tabs into the slots
12.
provided. Do not attach the upper rear panel yet. (Pipe
nipples removed for clarity)
Figure 8
You may now tighten down the control panel and side
13.
panel hardware. You may have to pull the front switch
out in order to completely fasten the screws. (See
Figure 9
.
Figure 9
Slot & Screw
Attach the top panel to the side panels.
14.
3
KNOCKDOWN BOILER ASSEMBLY
