Please check the following items before installation, if it is missing, please contact the
dealer .
8 ports PoE Ethernet Switch 1pc
Power adaptor 1pc
AC power cable 1pc
Accessory 1pc
User manual 1pc
1) Please turn off the signal power and display device power before installation, installation
with power will damage the transmission equipment;
2) Use network cable connect PoE IP camera and 1～8 downlink ports of product respectively;
3) Use a network cable connect equipment uplink port and NVR or computer;
4) Connect power adapter;
5) Check if the installation is correct, equipment is in good condition, the connection is
stable, then provide power for system;
6) Ensure the Ethernet equipment with power and work properly.
Installation
step
Feature
8 Ports PoE Ethernet Switch
8 Ports PoE Ethernet Switch
User Manual
1
2
8 ports PoE Ethernet Switch is a security surveillance Ethernet Switch which aims at Ethernet
high definition surveillance and Ethernet project security system. The product fully combines
the characteristics of security surveillance, provides fast packet forwarding ability and
abundant backplane bandwidth, which ensures clear image and fluent transmission. ESD
and surge protection circuit can improve product stability. The product supports one key
CCTV mode,
enable to
achieve VLAN, control the Net storm, protect the information security,
prevent the viral transmission and Ethernet attack, fully satisfy the needs ofEthernet video
security surveillance system and Ethernet project.
Board
Diagram
VerB 2.0
● Major ports:
1* 10/100
Ethernet port
● One key CCTV mode; 1～8 downlink ports can only communicate with uplink ports;
Restrain network storm under 3Mbps;Extend downlink ports transmission distance
to 250m;
● Power input: DC48V～57V;
● Standard: Meet IEEE802.3 、IEEE802.3u、IEEE802.3 af/at standards,PoE use End-Span,
the spare cable can be used for other purposes;
● Protection: Excellent anti-thunder, anti-static and anti-interference ability;
● Appearance: Delicate design and easy installation, configure the anti-theft lock hole,
guard against theft;
●Operation: Plug and Play, No Setting required.
8*10/100B
ase-TX
Ethernet ports(
PoE)
,
B
ase-TX
,
Notice
The transmission distance is related to the connected cable. We suggest standard Cat5e/6
network cable, so the transmission distance can up to further distance!
1) Device must be connected with lightning protection grounding; otherwise protection
level will reduce; please use above No.20 wire to connect the grounding terminal.
2) Turn the dial switch for left, the equipment can enter surveillance module after providing
equipment power.
Please follow below the installation steps
Notice
8 p
orts P
oE e
thern
et s
witc
h
Cat5
/5e/6 n
etwo
rk c
able
PoE IP camera
PoE IP camera
pow
er
PoE IP camera
PoE IP camera
PoE IP camera
PoE IP camera
Application
LC
D
NVR
Power
LED
CCTV mode
Front board
Back board
Side board
Kensington lock
uplink Ethernet port
Grounding Terminal
Power input port
PoE D
ownlink
Ethernet
port
9
10
/
100Base
-
TX
10
/
100Base
-
TX
