1. Interface Instruction
DIP Switch: Bridge Access Point, Bridge Client
DC: Power input port, DC12V/1A.
Digital Switch / Reset: Channel 1 would be added by short pressing (the matching
configuration time is about 5s), reset to factory defaults by pressing in 15s.
LAN1/POE Port: PoE port for handling all user traffic and powering the device. The
port is used as the LAN port under bridge mode, and as WAN port under gateway mode.
LAN2 Port: For handling all user traffic, could connect with PC, cameras and
switches.
2. LED Indicator Instruction
SIG1
、
SIG2
、
SIG3
、
SIG4
Signal Indicator:
Bridge Access Point: Output Power
Indicator
< 17dBm (SIG1 ON)
17~19dBm (SIG1-SIG2 ON),
20~22dBm (SIG1-SIG3 ON),
> 23dBm (SIG1-SIG4 ON).
Bridge Client: Signal Strength Indicator
Failure Connection: Flowing
Successful Connection:
0~-65dBm (SIG1-SIG4 ON),
-66~-75dBm (SIG1-SIG3 ON),
-76~-85dBm (SIG1-SIG2 ON),
≤ -86dBm (SIG1 ON).
LAN1
Connected and data is under transmission
(Flicker)
Disconnection (OFF)
LAN2
Connected and data is under transmission
(Flicker)
Disconnection (OFF)
The device is under normal operation
(Flicker)
Power ON (ON)
Power OFF (OFF)
Digital Switch / Reset: Channel 1 would be
added by short pressing (Value Circulation:
0-9-A-F)
Summary of Contents for CP5-450
Page 1: ...CP5 450 User Manual ...