To increase speaker volume, press the top volume button repeatedly until you reach the desired volume level.
To decrease speaker volume, press the bottom volume button repeatedly until you reach the desired volume level.
Making and Receiving Calls
Your headset supports both hand free and headset profiles.
Accessing call functions depends on which profile your phone supports.
Note:
Some phone do not support all features listed. See your phone user’s guide you can activate call functions for the Handsfree profile according to the
following
Using Your Headset Indicator LED
With charger plugged in:
Headset Indicator
Status
On Charging
in
progress
Off Charging
complete
With no charger plugged in:
Headset Indicator
Status
Off Power
off
ON (Steady)
Pairing mode
10 rapid flashes
Pairing successful
Flashes at a 3-second interval
(1.
seconds ON
2.9 seconds OFF)
Standby (not on a call)
Pulses at an 8-second interval
(2.0 seconds ON
6.0 seconds OFF)
Connected (on a call)
Note:
When the wireless headset is paired to the phone and there is no activity for 5 minutes, the blue flashing LED turns off, any button press on the headset,
resets the timer and the flashing resumes. If you press the up and down volume buttons at the same time during a call the pulsing LED turns off for the duration
of the call.
Audio Tones
Audio Tone
Headset Status
Single high tone when pressing volume
button
Volume maximum or minimum reached
Five rapid high tones, repeated every 20
seconds
Low battery
No audio indications, deteriorating audio
quality
Out of range
Series of 4 tones, low to high
Audio link open (headset mode).
Active call (hands free mode)
Ring tone
Incoming call
Single high tone
Pairing confirmation
Single low tone
Initiate voice activation
Dual high/low tone
Voice tag not recognized
Single high tone
End call
Series of 4 tones, high to low
Audio link closed (headset mode)
Call ended (hands free mode)
Fast high/low tone every 5 seconds (max
& min. volume confirm beep)
No network/service
No tone
Power ON/OFF
Troubleshooting
* When the Bluetooth headset can not connect with the handset. Please do follow operation:
1. Make sure the Bluetooth headset was turn on and was paired with the handset.
2. The Bluetooth function was startup.
3. The distance between handset and Bluetooth headset no over 10M, or there are some stumbling block between the
Bluetooth headset and handset like wall or other electron equipments.
4. The paired Bluetooth list was full in the message. One Bluetooth headset
can be linked up (or "paired") with up
to 8 devices
.
Please pair the headset again when the paired handsets was full.
* When the headset can not connect with the selected handset automatically.
Please use the charger to plug in again or turn off the power and
pair it again.
