UTEK TECHNOLOGY (SHENZHEN) CO.,LTD
.
6 / 7
Fig. 5. Universal relay mode
AP mode: When the equipment is operated under this mode, the equipment can be connected to the
Internet router with the network cable. For cellphones or computers etc., the wireless equipment can be
connected to the Internet through the UT-9021, see Fig. 6.
Fig. 6 AP mode
5.06. Basic information configuration for wireless network. Main page - wireless coverage. This option has
SSID number, channel, cipher mode and cipher key configuration.
5.07. DHCP service. Obtaining IP dynamically. Under the Advanced setup - Network setup, the IP address
setup has options of static and dynamic IP addresses, which can be obtained as required.
5.08. Under the WEB configuration interface, when the Advanced setup - Equipment management is clicked,
the following can be configured:
System configuration management: The system settings and factory settings can be recovered or
the equipment can be restarted through exporting the system configuration and importing the
backup configuration files here.
Router setup: The routing rule can be added manually.
DDNS setup: The DDNS rule can be set here.
QoS setup: Bandwidth allocation setups etc. for each IP or IP segment are allowed.
Administer setup: The system administer and password can be set here. Both the default user name
and password are admin.
System log: The log service can be set as opened or closed and the system log files can be checked.
Software upgrade: Through upgrading the software, the performance of the equipment can be
improved and the functions can be stabler and perfecter.
System time: The time information of the router can be set and the time interval of the system can
be optimized.
5.09. The factory settings can be recovered by pressing the “RST” for 6S. The soft recovery can also be
selected - configuration page - Advanced setup - Equipment management - System configuration
management.
