UTEK TECHNOLOGY (SHENZHEN) CO.,LTD
.
3 / 7
IV. Technical specifications
Wireless technology
802.11N, 2T2R 300M MIMO technology
Equipment interface
1 10/100 Mbps self-adaptive wired network interface.
1 reset button for restoring the factory settings.
1 3p plug-pull socket
Antenna
2 pcs, 2.4G gain: 3dBi TLB high-gain omni-directional external rubber stick antennas
Power supply
DC12~24V /1A
RF parameter
RF characteristics
802.11b/g/n:
2.4~2.4835GHz
Optional Korean, Japanese, ETSI, FCC communication channels
Transmission speed
300 Mbps
Receiving sensitivity
802.11n(2.4GHz)
802.11g
802.11b
-90dBm @ MCS0
- 90dBm @ 6Mbps
- 95dBm @ 1Mbps
-70dBm @ MCS7
- 72dBm @ 54Mbps
- 90dBm @ 11Mbps
-90dBm @ MCS8
-68dBm @ MCS15
Transmission power
Radio1(WLAN1)
802.11n(2.4GHz)(± 1.5dBm) 802.11g(± 1.5dBm)
802.11b(±1.5dBm)
20dBm@
MCS0~2/MCS8~10
20dBm @ 6~24Mbps
20dBm @1~11Mbps
18dBm @ MCS3/MCS11
18dBm @ 36Mbps
18dBm @ MCS4/MCS12
16dBm @ 48Mbps
18dBm @ MCS5/MCS13
16dBm @ 54Mbps
16dBm @ MCS6/MCS14
16dBm @ MCS7/MCS15
Size
150mm×100mm×37mm
Net weight
700g
V. Quick start wizard
5.01. Connect it on the DC12-24V power supply. The equipment will be OK when the red power supply indicator
light is On.
5.02. Switch it on and just wait for 30S, search the peripheral wireless networks with a wireless network adapter
installed computer or a cellphone and then find the network ID of UTEK_AP. When the IP address for the
wireless network adapter installed computer or cellphone is selected as 192.168.1.XXX (XXX: 0-252), the
wireless network connection will be allowed. The password for wireless connection is 12345678.
5.03. Network parameter configuration. Connect the equipment to the computer adapter with a piece of network
cable. Configure the IP address 192.168.1.XXX (XXX: 0-252) that is at the same network segment as that of
the equipment. The default IP address of the equipment is 192.168.1.254, see Fig. 1 for the configuration:
