Chapter 3: Installation Guide
- 4 -
Fig.3-2: Fix the switch onto the cabinet
3.2 Initialization
The AC power supply 100~240V/50~60Hz is used for UT-6516U/UT-6524 switch.
Connect it to the power cord, insert the plug and turn on the power. After startup, the
switch will automatically initialize and the LED lamps will appear as below:
Once the power is on, all indicator lamps will light up for one second and then go
out, indicating the reset of the system. The LED power indicator lamp will light up
constantly.
NOTE:
If the initialization process is not consistent as described above, please check
whether the power supply is connected correctly.
