UTE X2-1616 Manual Download Page 8

Page: 8 / 48

X2-1616: Modular 16x16 Matrix Switcher

U.T.E. electronic GmbH & Co. KG

www.ute.de

2. Panel Description

2.1.

1616

2.1.1. Front Panel

Figure 2- 1 Front Panel of X

1616

No.

Name

Description

①

IR sensor, receive IR signal sent from IR remote

②

Power

indicator

Illuminate red once powered on

③

LCD

screen

Display real-time operation status

④

INPUTS

Back-lit buttons for input selection, ranges from 0~ 9, 16 selectable

channels in total.

⑤

OUTPUTS Back-lit buttons for output selection, ranges from 0 ~ 9, 16

selectable channels in total.

⑥

: transfer video and audio signal synchronously

‚

: division button, to divide the output channels when switching to

more than one channel.

UNDO

: Undo button, to resume to the status before the command

just performed.

ENTER

: confirm switching operation. Operation will not be

executed by the matrix without confirmation.

ALL:

select all input/output channel

THROUGH

: To transfer the signals directly to the corresponding

output channels.



: Backspace button, to backspace the last press.

Summary of Contents for X2-1616
















































Search results

Summary of Contents for X2-1616

Reviews:

UTE X2-1616, Manual, Page: 8 / 48

Search results

Summary of Contents for X2-1616

Reviews: