HD22-4X: 4K 2x5 HDBaseT Splitter
U.T.E. electronic GmbH & Co. KG
10
www.ute.de
4.2.2
IR passthough control: One-to-all mode
Connect one IR Receiver to IR ALL IN port of 4K 2x5 HDBaseT Splitter, and then
connect 4 IR Emitters to IR OUT ports of HDBaseT Receives. The IR signal can be
transmitted from the IR Receiver to all IR Emitters to control the displays connected
with HDBaseT Receivers.
Figure 4- 2 Connection and System Diagram: IR One-to-all mode
4.2.3
Turn on/off displays via Wallplate Control Keypad
Press the display control button on Wallplate Control Keypad to turn on/off HDMI
display device, and then the corresponding activity LED ON/OFF will turn green (only
CEC support).
4.3
EDID Management
The EDID setting for the 4K 2x5 HDBaseT Splitter is defined by the first detected
display (detecting from 1-HDBT~5-HDMI).
For example: when output 1-HDBT connects with a 4K display, 4K 2x5 HDBaseT
Splitter will select 4K as output resolution and distribute 4K video signal to all displays.
If a display does not support the 4K video content, there are will no video output on the
display.
