22
PC Connection
Use the PC Connection option to connect UDI-
14™ to your PC and use it with the DiveSim™ application.
See page 48
for information on using DiveSim™.
WARNING:
Do not enter the water with the UDI-
14™ when the “PC connection” is active. This will
damage your UDI-
14™.
NOTE
: When the PC connection has not been used for 2 minutes, it becomes disabled to prevent any
damage to the UDI-
14™ in case you forget to disable the PC connection option.
To use PC Connection
:
1.
Connect the quick connector to the UDI-
14™
2.
Connect the USB cable to the quick connector.
3.
Connect the USB cable to the PC computer.
4.
On the UDI-
14™
Setup
menu, select
PC Connection
.
5.
Select
Enable
press
Enter
to enable the
PC Connection. A
PC
indication appears at
the bottom right
corner of the display
while the UDI-
14™ is
connected to the PC.
PC Connection
2. Disable
1. Enable
NOTE
: Updating users list and messages list
is done using the DiveSim™ software provided with your
on page 48 for details.
Network Setup
Use this option to select User and Buddy numbers; and a network.
NOTE
: You and your buddy must be properly defined on your UDI-
14™ and your buddy’s UDI
-
14™
respectively, and you must both be on the same network to be able to communicate using the
UDI-
14™.
1.
Select
Net
to define a network
to use, and press
Enter
.
NETWORK SETTING
1. Net
4. Setup
2. User
