UTC UDI-14 User Manual Download Page 11

Page: 11 / 58

Using the quick connector

A quick connector is used to connect the UDI-

14™ unit to a power supply or to a PC.

Attach the quick connector to the UDI-

14™ as show below, ensure the contacts are dry.

1. Quick Connector

2. Connector bracket on UDI-

14™

Charging the UDI-

14™

UDI-

14™ uses a rechargeable internal Li battery. This battery can be recharged only with the UDI

14™

charger.

NOTE:

Read

Lithium Polymer Charging, Handling, Safety Information

on page 4.

WARNING

: The UDI-

14™ is a completely sealed unit. It may stop functioning if opened. The warranty

will be void if the unit is disassembled or the seal is broken.

Ensure that the UDI-

14™ is fully charged before your dive.

Charge the battery for 12 hours prior to the first time you use the UDI-

14™.

To charge the UDI-14

™

Ensure that your hands, the UDI-

14™ and the

charger are dry!

Connect the quick adapter to the UDI-

14™

Connect the power charger to the quick connector.

Connect the power charger to a power supply. The green LED will turn on.

The charge is complete when the green light on the quick connector turns off.

Summary of Contents for UDI-14



























































Search results

Summary of Contents for UDI-14

Reviews:

Related manuals for UDI-14

Brands by name

Popular brands

UTC UDI-14, User Manual

Search results

Summary of Contents for UDI-14

Reviews:

Related manuals for UDI-14

Brands by name

Popular brands