Connections
Figure 2: Rear panel of camera
1. Power
LED.
2. Reset
button.
Press to reset camera to factory default
settings.
3. Ethernet RJ45 port.
Connect to network devices.
4. DIP
switches.
Configure camera settings.
5. Alarm input and output.
Connect to be able to trigger an alarm at
the network device.
6. Power
supply.
Connect 12 VDC or 24 VDC power supply.
7. Video
output.
Connect to a CCTV monitor
Alarm connection
Figure 3: DC alarm input and output wiring
1. OUT
2. GND
3. IN
4. GND
Table 2: Description of alarm connections
Alarm input
Type
TTL. Compliant with 48 V input voltage.
Connector type
Screw terminal
UltraView IP Box Day/Night Range Camera User Manual
7
