EN 6
TruVision Megapixel IP Dome Camera Quick Start Guide
Setting up the camera
Note:
If the light source where the camera is installed experiences
rapid, wide variations in lighting, the camera may not operate as
intended.
For detailed instructions, please refer to the user manual.
To quickly put the camera into operation:
1. Prepare the mounting surface.
2. Set the DIP switches to the desired positions and connect the
power cable, alarm I/O cables, RS-485 cable, audio cables and
network cable to the camera.
3. Mount the camera to the wall/ceiling using the appropriate
fasteners.
4. Set up the camera’s network and streaming parameters so that the
camera can be controlled over the network.
5. Program the camera to suit its location.
