P/N 466-
2940 • REV D • ISS 20NOV19
5 / 6
2. Notice the mounting tabs; they slide into slots on the back
of the tablet.
2.
3. To remove the tablet from the mounting bracket, use a
small screwdriver to push up on the release tab on the
bottom of the tablet’s back cover.
3.
Other
To increase speed and performance, the UltraSync
touchscreen communicates with the cameras using the local
network. Modified camera usernames or passwords require
that credentials be updated.
Specifications
Compatibility
ZeroWire panel
Display Size
7.0 in. (18 cm)
Display Resolution
1024 x 600
Input Technology
Capacitive Multi-touch
Operating System
Android
Wi-Fi
802.11 b/g/n 2.4GHz
Frequency Range
2412-2472 MHz for 802.11b/g/n (HT20)
2422-2462 MHz for 802.11n (HT40)
Max. RF Output Power
12.47 dBm (EIRP)
Backup battery
3.7 V DC
Dimensions (W × H × D) 192 x 116 x 15.24 mm
Regulatory information
Manufacturer
Placed on the market by:
UTC Fire & Security Americas Corporation, Inc.
3211 Progress Drive, Lincolnton, NC, 28092, USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
FCC
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Note:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off
and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the
equipment and receiver
•
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected
•
Consult the dealer or an experienced
radio/TV technician for help
Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance to this equipment would void the
user’s authority to operate this device.
FCC Radiation Exposure Statement: This product
complies with FCC radiation exposure limits set
for an uncontrolled environment. This equipment
should be installed and operated with a minimum
distance of 20cm between the device and your
body.
FCC ID: 2ADKXMS7016
DESTINATION CONTROL STATEMENT
– These
commodities, technology, or software were
exported from the United States in accordance
with the Export Administration Regulations.
Diversion contrary to United States law is
prohibited.
IC
Model / Modèle: MS7016
IC: 22288-MS7016
Mounting
tabs
Wall Bracket
Mounting
tabs
Slide tabs into mounting slots
Release tab
