TruPortal System Controller Quick Reference
3
P/N 460800001B 12JAN12 en-US
powered through the dual door interface module. Refer to the reader
manufacturer specifications for cabling requirements.
Reader wiring
Wiring In and Out readers
Input Circuit Wiring
Typically, these inputs are used to monitor door position, request to exit, or
alarm contacts. Input circuits are supervised. The input circuit is able to
report a condition of “Fault” for the status of the circuit, which appears as a
“Tamper” event for supervised conditions.
A supervised input circuit requires a resistor be added to the circuit to
facilitate proper reporting. The standard supervised circuit requires 1K ohm,
1% resistors and should be located as close to the sensor as possible.
Relay Circuit Wiring
All relays are dry contact.
The relays for siren and door strike have a Common pole (C), a Normally
Closed pole (NC), and a Normally Open pole (NO). When you are
controlling the delivery of power to the door strike, the Normally Open and
Common poles are used. When you are momentarily removing power to
unlock the door, as with a mag lock, the Normally Closed and Common
poles are used. Check with local building codes for proper egress door
installation.
Power
The TruPortal System Controller requires 18 VAC or 24 VDC for input
power at CN2, or 12 VDC at CN1 (24 VDC and 12 VDC input power were
not evaluated by UL). When powering the board from 12 VDC, the on-
board battery charger will not be used and the lead-acid backup battery
Callout
Description
Callout
Description
1
Buzzer
5
Data1
2
+14 V
6
Data0
3
Green LED
7
Ground
4
Red LED
CN10/CN17
CN11/CN18
BZ
+
GR
RD
D1
D0
0
12
3
1
2
3
4
5
4
1
3
2
6
7
CN10/CN17
CN11/CN18 CN12/CN19
BZ 14 GR RD D1 D0 0
A B
1 2
3
1 2
3 4
1 2
5
4
1
3
2
10
9
6
8
7
15
14
13
12
11
20
19
18
17
16
23
22
21
Callout
Description
Callout
Description
1
Buzzer
13
LED
2
+14 V
14
Buzzer
3
Green LED
15
Data0
4
Red LED
16
Data1
5
D1
17
Data1
6
D0
18
Data0
7
0 V
19
Buzzer
8
D1
20
LED
9
D0
21
Power
10
Reader (Out)
22
Ground
11
Ground
23
Reader (In)
12
Power
Output
30 VDC rating
Siren relay
1 A
Strobe relay
1 A
Strike relay
5 A
Aux relay
1 A
