Forney Corporation
UNIFLAME User’s Manual
Publication 372000-48 Rev H
1.
With “PASSWORD” displayed, press SELECT. “
0
xxx” appears, where the first digit shown is
adjustable via the UP/DOWN keys.
2.
With the appropriate first digit selected, press PROGRAM to confirm the value and move on to
the next digit (“0
0
xx”). Press the UP key twice to change the value from a 0 to a 2.
3.
With the appropriate second digit selected, press PROGRAM to confirm the value and move on
to the next digit (“02
0
x”).
4.
With the appropriate third digit selected, press PROGRAM to confirm the value and move on to
the next digit (“020
0
”). Press the UP key five times to change the value from a 0 to a 5.
5.
With the appropriate fourth digit selected, press PROGRAM to confirm the value (0205).
If the password was not entered correctly, the display will read “Wrong Password”. Press SELECT to re-
enter the password.
If the password was entered correctly, the display will read, “Valid Password. Press SELECT to Change
Password.” If you wish to change the password, press the SELECT key and “
0
xxx NEW” will be
displayed. Use the same programming method in previous example to enter any new four-digit password.
Once complete, the display will read “New Password ####” (where #### is the new number entered).
Press the UP or DOWN to return to the STATUS LOOP.
Entering the correct password allows the user a 20 minute access time to the EDIT or AUTOTUNE
modes. Changing any setpoint will restart the 20 minute time-out period.
17
