background image

DESCRIPTION  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1

Outputs   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1
LED   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Optical Integrity (

oi

)   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2

Communication   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3
Data Logging / Event Monitoring   .  .  .  .  .  .  .  .  .  .  .  .  . 3
Integral Wiring Compartment .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3

SIGNAL PROCESSING OPTIONS   .  .  .  .  .  .  .  .  .  .  .  .  .  . 3

GENERAL APPLICATION INFORMATION   .  .  .  .  .  .  .  . 4

Response Characteristics   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Welding   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Artificial Lighting .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
EMI / RFI Interference   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Non-Carbon Fires   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
False Alarm Sources   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4
Factors Inhibiting Detector Response   .  .  .  .  .  .  .  .  . 4

IMPORTANT SAFETY NOTES   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5

INSTALLATION   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6

Detector Positioning .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Detector Orientation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Protection Against Moisture Damage   .  .  .  .  .  .  .  .  . 6
Wiring Procedure  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 7
EOL Resistors   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 8
Setting Device Network Addresses                      .  .  . 

(EQ and EQP Models Only)   .  .  .  .  .  .  .  .  .  .  .  .  . 13

STARTUP PROCEDURE  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14

Fire Alarm Test .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14

TROUBLESHOOTING  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 14

MAINTENANCE  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

Cleaning Procedure  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

oi

 Plate Removal .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

Periodic Checkout Procedure   .  .  .  .  .  .  .  .  .  .  .  .  .  . 15
Clock Battery  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

FEATURES .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 16

SPECIFICATIONS   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 16

REPLACEMENT PARTS   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 19

DEVICE REPAIR AND RETURN  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 19

ORDERING INFORMATION   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 19

Accessories  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 19

APPENDIX A – FM APPROVAL AND 
PERFORMANCE REPORT   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 21

APPENDIX B – CSA APPROVAL   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 26

APPENDIX C – ATEX / CE APPROVAL  .  .  .  .  .  .  .  .  .  .  . 27

APPENDIX D – IECEx APPROVAL  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 28

APPENDIX E – VdS APPROVAL  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 29

Table of Contents

Summary of Contents for Det-Tronics X2200

































Reviews: