Utax P-C3060, Operation Manual, Page: 340 / 409

10-21
Troubleshooting > Troubleshooting
M
N
Message Checkpoints Corrective Actions
Reference
Page
Machine failure. Call
service. ― An error has occurred in the
machine. Make a note of the error
code displayed on the message
display, and contact your service
representative.
―
Maximum number of
scanned pages. Job is
canceled. Is the acceptable scanning count
exceeded? Cannot scan pages any more. Job is
canceled. Select [ OK ].
—
Memory is full. Job is
canceled. — The process cannot be performed
due to insufficient memory. Select
[ OK ]. The job will be canceled.
—
Memory is full.
Print job cannot be
processed completely.
*1
*1 When Auto Error Clear is set to [ On ], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-18)
— Unable to continue the job as the
memory is used up. Select
[ Continue ] to print the scanned
pages. The print job cannot be
processed completely. Select
[ Cancel ] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
•
Select [ On ] of RAM Disk Mode
in System Menu, and then
decrease the RAM Disk Size.
• Select [ Printer Priority ] of
Optional Memory in System
Menu.
NOTE
Before changing the RAM Disk
Setting or Optional Memory setting,
contact your administrator.
—
Message Checkpoints Corrective Actions
Reference
Page
Non-genuine Toner.
Press [Help]. Is the installed toner container our
own brand? The manufacturer assumes no
responsibility for damage caused by
a non-genuine toner. We
recommend that you only use
genuine toner containers. When
you want to use the toner container
currently installed, select the [
OK ]
key and the [ Stop ] key
simultaneously for 3 seconds or
more.
—