Utax P-C2665 MFP, User Manual Fax System

Page: 110 / 202

FAX Operation (Advanced)
4-52
Other Convenient Functions
Functions that are convenient when sending fax are introduced here. For usage of each function, refer to the
machine’s
Operation Guide .
Original Size Selection
Select the size of originals to be scanned. Be sure to select the original’s size when using custom size originals.
1-sided / 2-sided Selection
Select the type and binding of originals.
NOTE:
For direct transmission, you cannot use 2-sided sheet Originals. (Refer to Selection of Transmission
Method on page 3-2 .)
Original Orientation
To ensure that the originals are sent in the correct orientation for reading, indicate which end of the original is
the top.
To use the two-sided originals, select the orientation of the originals.
Selection of Original Image
Select Original Image.
Continuous Scan
When you cannot place multi-page originals into the document processor at one time, the multi-page originals
can be scanned in batches and sent as one job. In this method, originals are scanned until you press [END
Scan] (the
Right Select key).
Original Type Binding Orientation
1-sided sheet original 1-
sided – –
2-sided sheet original 2-
sided Binding Left/Right,
Biding Top Top Edge Top,
Top Edge Left
Item Detail
Text +
Photo Suitable for originals containing a mixture of text and
photos.
Text Sharply renders pencil text and fine lines.
Photo For enhanced copies of photographs.
for OCR Image quality suitable for OCR software (Applications
converting images into text data)