Utax P-C2160DN, Service Manual

Page: 44 / 211

2PS/2PT
1-3-10
Maintenance Counter reset for the maintenance kit (26/28 ppm model only)
Description
The "Install MK" message means that maintenance kit should be replaced at 200,000
pages of printing. The interval counter must be manually reset using this service item.
Maintenance kit MK-592 (for 120 V specifications)
Maintenance kit MK-590 (for 230 V specifications)
Maintenance kit includes the following units:
Drum unit x 4
Developing unit (K, M, C, Y)
Intermediate transfer unit
Fuser unit
Paper feed roller unit
Retard roller unit
MP paper feed roller
Purpose
To reset the life counter for maintenance kit.
Procedure for replacing the maintenance kit
Drum unit (see page 1-5-20)
Developing unit (see page 1-5-18)
Intermediate transfer unit (see page 1-5-21)
Fuser unit (see page 1-5-25)
Paper feed roller unit (see page 1-5-14)
Retard roller unit (see page 1-5-12)
MP paper feed roller (see page 1-5-16)
Method
1. Enter the Service Setting menu.
2. Select [Maintenance] using the cursor up/down keys.
3. Press the OK key.
4. Press the OK key. The counter for each component is reset immediately.
Note:
Occurrences of resetting the maintenance kits are recorded on the service status page
or event log in number of pages at which the maintenance kit was replaced (see page 1-
3-2, 1-3-15 ). This may be used to determine the possibility that the counter was error-
neously or unintentionally reset.
Service items Description