Utax P-C2160DN, Service Manual

Page: 41 / 211

2PS/2PT-2
1-3-7
Service items Description
No. Description Supplement
(38) Color printing double count
mode 0: All single counts
3: Folio, Single count, Less than 330 mm (length)
(39) Black and white printing double
count mode 0: All single counts
3: Folio, Single count, Less than 330 mm (length)
(40) Billing counting timing -
(41) Temperature (machine inside) -
(42) Temperature (machine outside) -
(43) Relative temperature
(machine outside) -
(44) Absolute temperature
(machine outside) -
(45) Fixed assets number -
(46) Job end judgment time-out time -
(47) Job end detection mode -
(48) Reset the prescribe environmen-
tal
0: OFF
1: ON
(49) Media type attributes
1 to 28 (Not used: 18, 19, 20)
* : For details on settings,
refer to MDAT command
in “Prescribe Commands
Reference Manual.
Weight settings Fuser settings
0: Light 0: High
1: Normal 1 1: Middle
2: Normal 2 2: Low
3: Normal 3 3: Vellum
4: Heavy 1 Duplex settings
5: Heavy 2 0: Disable
6: Heavy 3 1: Enable
7: Extra Heavy
(50) Calibration information Black/Cyan/Magenta/Yellow
(51) RFID information -
(52) RFID reader/writer version infor-
mation -
(53) Engine parameter information -
(54) Soft version of the optional paper
feeder Paper feeder 1/Paper feeder 2/Paper feeder 3
(55) Version of the optional message -
(56) Color table version -
(57) 2th color table version -
(58) Altitude 0: Standard
1: High altitude 1
2: High altitude 2