background image

Before getting started, let’s check below lists to make sure it is just right for you!

2

3

4

5

2

Does your TV

(including accessories)

weigh MORE than

100 lbs. (45.5 kg)?

What is your
wall made of?

Do you have

all the tools

needed?
(NOT INCLUDE)

Tape

Measure

CAUTION

Pencil

Level

Screw

driver

Electric

Drill

No? Perfect – you may continue.

Yes? This mount is NOT compatible.

Drywall with

wood studs?

CAUTION:

CAUTION: DO NOT exceed the maximum weight

indicated. This mounting system is intended for use only

with the maximum weights indicated. Use with products

heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.

Solid concrete

?

1/2 in.

(13 mm)

Socket

Wrench

Stud

Finder

7/32 in.

(5.5 mm)

Wood

Drill Bit

● This product is designed for use in wood stud, solid concrete walls - DO NOT install  into drywall alone
● The wall must be capable of supporting five times the weight of the TV and mount itself
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Unsure?

Call Customer Service:

1-800-460-0956

3/8 in.

(10 mm)

Masonry

Drill Bit

Hammer

1

Check your TV

VESA is within

Min and Max size

No? This mount is NOT compatible.

Yes? Perfect !

MAX:600mm/23.62"

(MIN:100mm/3.94")

MAX:400mm/15.75"

(MIN:100mm/3.94")

Summary of Contents for XTL018-1
















Reviews: