USR IOT USR-N540 User Manual Download Page 65

Page: 65 / 73

USR-N540 User Manual www.usriot.com

Jinan USR IOT Technology Limited 65 / 73 [email protected]

Port configuration ( Port1 / Port2 configuration)

Click the COM to set, revise parameter then click “Save COM1”.

Software Configuration-COM 1 Configuration



Serial Baud rate: it can be standard or customized.



Parity/Data/Stop: serial parameter.



Serial Flow control: None/Hardware/XON XOFF, None for no flow control, Hardware for hardware flow control,
XON/XOFF for software hardware flow.



Work Mode: TCP Server /TCP Client/HTTPD Client/UDP Client/UDP Server



Destination IP/Port: IP connected when USR-N540 works as client (TCP Client/HTTPD Client/UDP Client)



Local Port: port USR-N540 to connect. Advice to set it to “0’’ when USR-N540 works under TCP Client for
connection with Random port.



TCP Server Type: No.



Modbus TCP: set this when Modbus TCP to Modbus RTU is needed.



Serial pack time: relate to serial unpacking mechanism.



Serial pack length: relate to serial unpacking mechanism.



Similar RFC2217: Please refer to Chapter 3.5.10 Similar RFC2217
4.

Firmware Upgrade
If USR-N540 need to upgrade with new firmware, please contact USR sales.

Summary of Contents for USR-N540










































































Search results

Summary of Contents for USR-N540

Reviews:

Related manuals for USR-N540

Brands by name

Popular brands

USR IOT USR-N540, User Manual

Search results

Summary of Contents for USR-N540

Reviews:

Related manuals for USR-N540

Brands by name

Popular brands