USR-G806 User Manual
Technical Support:
h.usriot.com
Jinan USR IOT Technology Limited
www.usriot.com
41
Figure47 setting page
Figure48 setting page
Note:
1. Static routing is not added by default. When using this function, please configure it according to specific
requirements.
2. After adding, please enable the forwarding of Firewall - > basic settings.
3.3.10 Firewall
3.3.10.1 NAT Function
3.3.10.1.1 MASQ
MASQ, also known as MASQUREADE, converts the source IP leaving the packet into the IP address of an
interface of the router. If the IP dynamic camouflage is checked in the figure, the system will change the source
IP address of the packet leaving the router to the IP address of the WAN port.
Note:
Enable by default.
