EN
12
7 How to clean
This appliance will not operate properly if the strainer is clogged.
Be sure to clean the strainer regularly.
Close the shutoff valve by turning clockwise.
Unscrew the nut.
Clean the strainer with a small brush.
Rescrew the nut.
Open the shutoff valve by turning counter clockwise.
Regularly wipe off the seat with a dry soft cloth or sponge, or wash with a damp cloth
and mild detergent.
Release the lid.
Pull left and up the left hinge part.
Release the right hinge part (be aware of your fingers not to be caught).
In order to protect the plastic parts, please only use neutral cleansers.
(Do not use toilet cleansers, home cleansers, bleach, benzene,
paint thinner, cresol (lysol), etc.).
Press the ( ) button for 2 seconds to extract the bidet nozzle.
Press the button again to extract the cleansing nozzle.
Use a toothbrush or soft cloth to clean the nozzle.
Press “Stop” button to retract the nozzle.
Strainer maintenance
Cleaning the body
Nozzle cleaning
Do not forcefully push or pull the nozzle.
It may result in a damage to the device.
Caution
Manual cleaning
Make sure that the occupied sensor is not activated (do not sit on the
seat or place hands on the seat sensor).
Auto cleaning
Press the ( ) button for 2 seconds to start auto cleaning of the nozzles.
Press “Stop” button while cleaning to retract the nozzles.
feminine
feminine
posterior
posterior
Water tank
Water hose
Shutoff valve
Strainer
(1/2'', 3/8'')
T-valve
Toilet cleanser
Thinner
Benzene
Bugs killer
Sand paper
EN
EN
12
13
7 How to clean
8 Maintenance
ES
Draining water -
while not using over extended period of time
Unplug the power supply cord.
Detach the unit.
Make sure the power cord
is plugged in properly.
Set the temperature of water to low or middle.
Not using the unit for a long time in winter unplug and
drain the water from the water tank and pipes thoroughly.
Screw the drain bolt and install the appliance.
Close the shutoff valve.
Uphold the appliance and thoroughly drain
the water by unscrewing the drain bolt
(beware of losing the drain bolt).
Not doing so may cause
Refer to the installation method.
Refer to the trial operation method in order to
use this appliance again.
If there is no heating system in the toilet, wrap pipes with cloth
or other materials.
Refer to the water drain method.
Preventing freezing
Drain bolt
This appliance will not operate properly if the strainer is clogged.
Be sure to clean the strainer regularly.
Close the shutoff valve by turning clockwise.
Unscrew the nut.
Clean the strainer with a small brush.
Rescrew the nut.
Open the shutoff valve by turning counter clockwise.
Strainer maintenance
Water tank
Water hose
Shutoff valve
Strainer
(1/2'', 3/8'')
T-valve
EN
EN
12
13
7 How to clean
8 Maintenance
ES
Draining water -
while not using over extended period of time
Unplug the power supply cord.
Detach the unit.
Make sure the power cord
is plugged in properly.
Set the temperature of water to low or middle.
Not using the unit for a long time in winter unplug and
drain the water from the water tank and pipes thoroughly.
Screw the drain bolt and install the appliance.
Close the shutoff valve.
Uphold the appliance and thoroughly drain
the water by unscrewing the drain bolt
(beware of losing the drain bolt).
Not doing so may cause
Refer to the installation method.
Refer to the trial operation method in order to
use this appliance again.
If there is no heating system in the toilet, wrap pipes with cloth
or other materials.
Refer to the water drain method.
Preventing freezing
Drain bolt
This appliance will not operate properly if the strainer is clogged.
Be sure to clean the strainer regularly.
Close the shutoff valve by turning clockwise.
Unscrew the nut.
Clean the strainer with a small brush.
Rescrew the nut.
Open the shutoff valve by turning counter clockwise.
Strainer maintenance
Water tank
Water hose
Shutoff valve
Strainer
(1/2'', 3/8'')
T-valve
EN
EN
12
13
7 How to clean
8 Maintenance
ES
Draining water -
while not using over extended period of time
Unplug the power supply cord.
Detach the unit.
Make sure the power cord
is plugged in properly.
Set the temperature of water to low or middle.
Not using the unit for a long time in winter unplug and
drain the water from the water tank and pipes thoroughly.
Screw the drain bolt and install the appliance.
Close the shutoff valve.
Uphold the appliance and thoroughly drain
the water by unscrewing the drain bolt
(beware of losing the drain bolt).
Not doing so may cause
Refer to the installation method.
Refer to the trial operation method in order to
use this appliance again.
If there is no heating system in the toilet, wrap pipes with cloth
or other materials.
Refer to the water drain method.
Preventing freezing
Drain bolt
This appliance will not operate properly if the strainer is clogged.
Be sure to clean the strainer regularly.
Close the shutoff valve by turning clockwise.
Unscrew the nut.
Clean the strainer with a small brush.
Rescrew the nut.
Open the shutoff valve by turning counter clockwise.
Strainer maintenance
Water tank
Water hose
Shutoff valve
Strainer
(1/2'', 3/8'')
T-valve
Do not use force to push or pull the nozzles while cleaning.
Summary of Contents for UB-6635R
Page 20: ...MEMO...
Page 21: ...MEMO...
