USOUND HELIKE 1.0 UA-E3010 User Manual Download Page 29

Page: 29 / 30

Helike 1.0 UA-E3010 | User manual

Released in November 2020, updated in June 2022

USound GmbH | www.usound.com | [email protected]

RELATED DOCUMENTATION

In addition to this user manual, the following documentation is available for Helike 1.0 UA-E3010:

Helike UA-E3010 Product Brief

Helike UA-E3010 Schematics

DSP Firmware for Helike UA-E3010

Audio device configuration for Helike UA-E3010

COMPATIBLE PRODUCTS

Product Name

Description

Dione Maxi UY-R3020

Bendable audio array with 20 USound MEMS speakers and an external
amplifier board Amalthea 2.0 to drive them.

Dione Mini UY-R3010

Bendable audio array with 15 USound MEMS speakers and integrated
amplifiers, 3 connected segments, extendable using connectors

Danube 5.0 UAM-P2050

Audio module combining a USound MEMS speakers and an electrodynamic

woofer in a 2-way system. To be used with development board Helike 1.0

Carme 3.0 UJ-R1030

A speaker box designed for testing the acoustical performance of USound
MEMS speakers Adap and Achelous.

Carme kit UJ-E1040G00,
UJ-E1040C05,
UJ-E1040C06

A speaker evaluation kit for testing the acoustical
performance of USound MEMS speakers Adap, Achelous
and Conamara.

Summary of Contents for HELIKE 1.0 UA-E3010































Search results

Summary of Contents for HELIKE 1.0 UA-E3010

Reviews:

Related manuals for HELIKE 1.0 UA-E3010

Brands by name

Popular brands

USOUND HELIKE 1.0 UA-E3010, User Manual

Search results

Summary of Contents for HELIKE 1.0 UA-E3010

Reviews:

Related manuals for HELIKE 1.0 UA-E3010

Brands by name

Popular brands