USM Haller E
Operating Instructions
Date
02.19/us
8
9
2.1 Note
2.6 Transportation
All delivery and removal work must be carried out by USM
or by authorized USM sales partners.
Always unplug the power plug before moving the furniture.
Always use the specially developed USM transportation
lifters for easy and safe transportation.
2.7 Construction
The USM Haller is assembled, activated and handed over
with operating instructions by USM or a USM-authorized
sales partner. During this, the system, the functions and the
safety aspects are explained.
2.8 Changes and Modifications
Configuration and modifications to the USM Haller E shall
be carried out by USM or authorized USM personnel.
The only aspects that may be performed independently
are replacing the e-Inserts and installing the e-Reflective film
(see 3.3 Adapting the Product)
Improper assembly or modification of USM Haller
furniture may lead to impairment of its functions,
to personal injury or damage to the USM Haller
furniture.
2.9 Connection
Before using the electronic system, check whether
the system’s operating voltage corresponds to the
local power supply. The plug of the e-Power supply
including the e-Power cable should be plugged into
a freely accessible power outlet.
Check the USM Haller E for external damage before
use. Do not connect damaged USM Haller E furniture
to the power supply, as it may endanger your safety!
Stow excess cable lengths to prevent tripping.
The system is ready for operation as soon as it is plugged
in to the power supply.
2 Safety
2.4 Personal Safety
Risk of Crushing
Pull-out elements (doors, trays, etc.) create a risk
of crushing or pinching!
Suffocation hazard
Danger of suffocation due to packaging material
and plastic! Do not allow children to play with
packing material.
Electric shock hazard
USM Haller E is equipped with electrical compo-
nents. Improper use may lead to a short circuit, fire,
damage or electric shock. During installation and
repair work, the power plug of the USM Haller E
must be unplugged.
Children and persons with limited abilities
USM Haller is not intended to be used by persons
(including children under the age of 8) with limited
physical, sensory or mental abilities or persons with
a lack of experience and/or familiarity unless they
are supervised by a person who is responsible for
their safety or this person has instructed them in how
to use the USM Haller product. Children should be
supervised to ensure that they do not climb onto the
furniture or hang on the furniture, as the furniture
may tip over. In particular, doors should be closed
to prevent children from playing with pull-out compo-
nents, etc. or climbing into furniture compartments.
2.5 Safety equipment
e-Power supply detects short circuits in the USM Haller E
furniture. In such cases, the supply will immediately be cut off.
To restart the supply, the power has to be interrupted on the
primary side of the power adapter. This can be done by conduct-
ing one of the following steps:
— Switch the socket off and back on again.
— Unplug the e-Power supply and plug it back in.
— Unplug the e-Power cable to the power adapter
and plug it back in. To facilitate the access to the
power adapter, which is located under the furni-
ture, the furniture can be raised by unscrewing
the adjustable glide.
— If you have tried all of the above actions without
success, a power cable with a switch can be
used. Switch this off and back on again.
2.3 Technical Condition of
the Product
Defective components may only be replaced with original
USM parts by USM-authorized specialists. USM Haller E
complies with the required safety regulations. Improper
modifications and repairs may result in unforeseeable
hazards for the user.
CE Conformity Marking
Product may not be disposed of with
household waste
For indoor use only
Read operating instructions before use
Protection class II: Protection through double
or reinforced insulation
Protection class III: Protection through low voltage
Operating unit can be mounted outside a
light without additional housing
Safe electrical insulation with short
circuit protection
Low voltage (Safety Extra Low Voltage)
DC voltage
Installation on materials whose flammable
properties are not known. Even in the event
of damage, the mounting surface must not
exceed 115 °C.
Maximum permissible housing temperature
in Celsius
DC pole specification on plug/socket
Danger – Hazardous voltage!
Important note
110
M
M
2.2 Safety Precautions
All safety precautions must be observed at
all times. May cause danger for persons or
damage if the system is operated improperly.
During installation and repair work, the
power plug of the USM Haller E must be
unplugged.
The system may only be operated with the original
USM e-Power supply and components. Operating the
system with third-party or defective components may
cause life-threatening injuries.
Risk caused by short circuit: Make sure that metal
objects (jewelry, watches, cutlery, etc.) do not come
into contact with the e-Ball. This may cause a short
circuit and can damage the objects.