- 3 -
CM-680
I
NSTRUCTION
M
ANUAL
Ultra Stereo Labs, Inc.
- 12 -
CM-680
I
NSTRUCTION
M
ANUAL
Ultra Stereo Labs, Inc.
Introduction
Please read this entire manual before commencing your
installation.
The Ultra
Stereo CM-680 Projection Booth Monitor has been
designed for high performance, ease of use, and years of trouble free
service. Installation and setup of the monitors has been
considerably simplified. No special tools are required. The built in
VU meter and test jack give the technician immediate information
about the status of the processor and all power amplifiers.
All controls necessary for daily operation of the processor are
easily accessible on the front panel. The components that make
up the CM-680 monitors are of computer grade for reliability. All
front panel controls are individually sealed for long life. All
Ultra
Stereo equipment has been burned-in at the factory for
an extended period in order to eliminate the possibility of
premature failure. Unpack the unit carefully. If the container has
been damaged, thoroughly inspect the equipment to make
certain that there is no hidden damage. File a claim immediately
with the carrier if any damage is found. Also advise your dealer
or the factory.
Small, standard
screwdriver
No. 2 Phillips
screwdriver
Trimpot
adjustment
tool
Wire
Strippers
TOOLS REQUIRED
All
Switches
On:
330 Hz
All
Switches
On:
500 Hz
All
Switches
On:
800 Hz
TIME DELAY
All
Switches
On:
1.4ms
All
Switches
On:
1.8ms
All
Switches
Off:
297 Hz
All
Switches
Off:
0.7ms
Llo Lhi Clo Chi Rlo Rhi
HORN EQ 1-3 ON
SCREEN EQ
4-6 ON
330hz
330hz
330hz
500hz
500hz
500hz
800hz
800hz
800hz
1.4ms
1.8ms
1.4ms
1.8ms
1.4ms
1.8ms
LEFT
CENTER
RIGHT
Normal/Bypass Switch and LEDs
Crossover
Output
Levels
LEFT
CENTER
RIGHT
Bypass
Xover
Levels
Screen EQ
4-6 On/Off
Horn EQ
1-3 On/Off
CROSSOVER
FREQUENCY
Figure 6
