All rights are reserved by USI. No part of this technical document can be reproduced in any form
without permission of USI.
WM-BAC-AT-49 module, Wi-Fi/Bluetooth RF user manual, revision 1.0
Page 17
5. CE RF Exposure Information
This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. To comply
with the RF exposure requirements, this module must be installed in a host platform that is intended
to be operated in a minimum of 20 cm separation distance to the user.
Hereby,
USI
declares that the radio equipment type WiFi/BT Module
is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://www.usiglobal.com/tw/WM-BAC-AT-49/DoC.pdf
In all cases assessment of the final product must be met against the Essential requirements of the RE
Directive Articles 3.1(a) and (b), safety and EMC respectively, as well as any relevant Article 3.3 re-
quirements.
1. The Dipole antennas (WiFi maximum gain: [email protected], 2.67dBi@5GHz; BT maximum gain:
[email protected]) were verified in the conformity testing, and for compliance the antenna shall not be
modified. A separate approval is required for all other operating configurations, including different an-
tenna configurations.
2. If any other simultaneous transmission radio is installed in the host platform together with this
module, or above restrictions cannot be kept, a separate RF exposure assessment and CE equipment
certification is required.
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
AT
BE
BG
HR
CY
CZ
DK
EE
FI
FR
DE
EL
HU
IE
IT
LV
LT
LU
MT
NL
PL
PT
RO
SK
SI
ES
SE
UK
