Cold Press Juicer 11
SECTION 3
3a. STEP BY STEP PROCESS TO ASSEMBLE YOUR
NUTRIPRESS JUICER
STEP 1: CHOOSING THE RIGHT LOCATION:-
In order to ensure the safe and trouble-free operation of the product, the setup location
must fulfil the following prerequisites:
• Place the unit on a flat stable surface.
An unstable location may:
• May create noise as your machine may vibrate.
• May be dangerous since vibration may cause the machine to move.
• Do not use the product outdoors.
• Do not operate the product near hot gas or hot stove.
• Choose the setup location in such a way that children cannot reach the product.
• The product is not intended to be installed in a wall or a built-in cupboard.
• Do not set up the product in a hot, wet or extremely damp environment or near
flammable material.
STEP 2: MAIN UNIT AND JUICING BOWL ASSEMBLY:-
a. Before starting the assembly, please check if the Silicone plug provided below the pulp
spout is firmly inserted. Note: The Juicer may leak if not assembled properly. While juicing,
prevent excess pulp build-up inside the pulp spout as it may dislodge the silicone plug.
• The main unit and the juicing bowl have white arrows to indicate the correct
position for fitment.
• Place the juicing bowl on the main unit so that the white
arrow on the bowl is directly placed over the white arrow
on the main unit.
